SEARCH - Body / Bed

(Used) 2009 International DuraStar 4300, DUMP BODY, Champion, model: C816SFDA-106102, 10’ length, 39” height, 94” width, For more information about this item, give us a call. We ship Worldwide! (CRG HEAVY TRUCK PARTS)

DUMP BODY IN GOOD CONDITION DIMENSIONS 10' LENGTH X 4' HIEGHT X 8' WIDTH COMES WITH LIFT CYLINDER

USED Henderson 13 foot 48 inch sides, stainless steel dump box.Includes lift cylinder

GOOD USED ALUMINUM KANN GRAIN BODY 25FT LONG WITH 6 FT SIDES AND DUAL HOISTS , 3 REAR DOORS WITH CENTER SMALL DUMP DOOR , HIGH SIDES FOR SEED CORN NICE CLEAN BODY SEE PICS

Made by Godwin Manufacturing. Inside width from side to side is 84". SIDES: One piece sides with no welded seams. 10-gauge A607 grade-50 high tensile steel with boxed top rail and fully welded boxed rear corner post. 6" side board gussets with full length rub rails, and box-type side braces. RUB RAILS: Full length 45 degree deflector panels are an integral part of the sides. FLOOR: 10 gauge -two piece high tensile steel floor with 2" radius corners. FRONT WALL: 10 gauge high tensile A607 grade 50 steel. Full width integral inverted V-type horizontal bracing. TAILGATE: 3 Panel fully boxed 10 gauge high tensile A607 grade 50 steel with boxed horizontal reinforcements and sloping lower deflector. Tailgate is 6" higher than side. TAILGATE HARDWARE: Heavy duty: Upper is offset cast steel hinge. Lower hook is cast steel: engages tailgate pin from top. Banjo eye keeps tailgate chain in position you select. UNDERSTRUCTURE: Completely jig built with 4" structural channel crossmembers on 12" centers and 6" structural channel longitudinal. Crossmembers are gusseted and welded to longitudinals.

USED TRUCK FLATBED 15FT X 8 FT WITH SMALL HEADACHE RACK DUMP CAPABILITIES WITH CYLINDER

McClain Galion, M#4020, Capacity 6

USED USED ROLLOFF BODY MANUFACTURER: RK MODEL: U5-OR-174 ROLLOFF Capacity: 60,000 lb Container Size: 18-22' Axle:Tandem Hoist Length: 280" Raised Dump Angle: 47° Filtration System: 3-Micron w/ Dual Viscosity Oil Wiring System: Plug and Play Winch Cylinders: 7” x 4” x 80” Safety Props: Heavy Duty Axle Spread: 51-55"

GOOD USED DUMP BOX.... 17 FT LONG X 96'' WIDE SEE PICS

11' Dump Body, Solid Sides, Multi Function Tailgate, Headache Rack, Tarp, Hitch , ICC Bumper, Electric Over Hydraulic Hoist, Quality Install Services Available

18'L 96"W Lumber Dump With Stake Sides, Fixed Headache Rack, Diamond Plate Decking, Rear Hitch, Hydraulic Hoist, Call DTI Trucks For More Information And Shipping Quotes, Quality Install Services Available

(Used) 2009 International DuraStar 4300, DUMP BODY, Champion, model: C816SFDA-106102, 10’ length, 39” height, 94” width, For more information about this item, give us a call. We ship Worldwide! (CRG HEAVY TRUCK PARTS)

20'L 96"W Lumber Dump Flatbed, Fixed Headache Rack, Stake Pockets, Smooth Steel Deck, Mounting Pockets, Call DTI Trucks For More Information And For Shipping Quotes, Quality Install Services Available

COB217 ALUMINUM 17' DUMP BODY fits TRIAXLE DUMP Length: 17.5’, Width: 8’, Height: 58.5”, Material: aluminum, For more information about this item, give us a call. We ship Worldwide! (CRG HEAVY TRUCK PARTS)

10'L Flatbed Dump, Electric Over Hydraulic Hoist, Wood Decking, Headache Rack, Quality Install Services Available.

GOOD USED 10 FT DUMP BOX SHORT SIDE NO CAB PROTECTOR SEE PICS RT SIDE HAS SOME RUST

GOOD USED BOX 19' LONG , 5.5' TALL SIDES , WITH TARP SEE PICS

GOOD USED STEEL 16' DUMP BOX WITH 3' SIDES & HOIST SEE PICS

USED 10FT DUMP BODY BODY RUNS OFF PTO + PUMP MOUNTED ON TRANSMISSION NO HYDRAULIC OIL TANK 29.5" (750mm) Frame Width 10’ 8” overall length 12” sides + 36” slots for wood extensions 20” tailgate + 36” slots for wood extensions 57” from top of frame to bottom of cab protector

GOOD USED 10' DUMP BOX WITH HOIST SEE PICS

GOOD USED STEEL 18' DUMP BOX SEE PIC

GOOD USED BOX NEEDS TOUCH UP SEE PICS

USED 1990 FLD120 GRAINE BEN 20' LONG WITH 41" SIDES, DUMPS

USED 215"L X 93W X 40T SIDES. INCLUDES SCISSOR HOIST ASSY

USED HARSH SCISSOR HOIST. 18'L X 100"W X 4' SIDES.

USED W/SCISSOR HOIST

DUMP BODY IN GOOD CONDITION DIMENSIONS 10' LENGTH X 4' HIEGHT X 8' WIDTH COMES WITH LIFT CYLINDER